top of page

Slurry Erosive Wear Tester

Slurry Erosive Wear Tester


The Slurry Erosive Wear Tester is used to test the erosive resistance of solid materials to slurry composites, various materials can be tested such as polymers, plastics, hard materials etc.


The Slurry Erosive Wear Tester has been designed to determine erosive properties of materials. Samples of Slurry Erosion Tester have been prepared in the size of 75x25x4 to 6 mm & all the samples were cleaned and weighed before insertion in to the Rig. Slurry contains water and sand particle. Samples are fixed with six rotating spindles and six stainless steel pots, all the six pots submerged with water cooled re-circulating system to maintain slurry temperature, the test can be carried out with known RPM and contains duration after successful test. Finally specific weight loss has been determined.

Technical Specifications:

Spindle Speed
-100 to 1500 RPM
Motor Drive
-AC Frequency Inverter
Speed Indicator
-Digital RPM Indicator
-Preset 99hrs:59min:59sec
Slurry Vessels
-Double walled water cooled
-Dia 120mm length
No. of Samples
Sample Size
-25.4mm X 76.2mm X6.35mm
Water Cooling System
-Water circulation for slurry Vessels
Temperature Measurement
-6 channel temperature measurement for slurry parts
Sample Impact angles
-150 , 300, 450 (variables)
-440V, 15 Amps, 3 Phase
Slurry vessels & water cooling system motorized automated up & down system.
Water Recirculating Chiller Unit - Optional

bottom of page